Making changes - editing with Simple Entry

Editing your entered music with the Simple Entry tool.

Whether you make a mistake when entering notes, or you change your mind about a passage, Simple Entry is the fastest, most efficient way to change music that has already been entered. With Simple Entry, you can change existing pitches or durations as well as add notes above or below a written note to create chords.

By the end of this lesson, you will know how to:

1. Edit using the Simple Entry palette
2. Edit using your computer keyboard

To begin at this point, open tutorial document Tutorial 2a.MUSX.

Editing using the Simple Entry palette

One option is to use the tools on the Simple Entry palette to make changes.

To use your mouse to delete, add, and change the pitch and duration

1. Select the Simple Entry tool .
2. Click the Eraser tool in the Simple Entry palette. Notice an eraser appears next to your mouse cursor.
3. Click the first note in measure 1, top staff. The dotted quarter note disappears. Subsequent notes shift to the left.
   
   

At this point, do not choose any other tools or click another measure. If you do, Finale automatically fills this measure with rests and you will need to undo (press COMMAND+Z) until the automatic rests disappear to resume.

4. Now, let's insert a quarter note. Click the Quarter Note tool and click the F space just to the left of the eighth note.
   
   
5. Immediately after you enter a note, you can click it again and drag vertically to change the pitch. Let's do that now. Click the quarter note F you just entered and drag it up one step to G.

6. You can't simply click the following eighth note and change its pitch, because it will also change to a quarter note. To click and drag any pitch at any time without changing its duration, hold down the OPTION key, then click and drag.

7. Click the Dot tool so your cursor looks like a dotted quarter note and then click the first G quarter note to change it back to a dotted quarter. Now we should be back where we started. Let's continue arranging our song by replacing the half note in the left hand piano staff with two quarters.

8. Double-click the Quarter Note in the Simple Entry palette.
9. Click on the half note B in the bottom piano staff to turn it into a quarter note.
10. Click on the G space to add a quarter note G on beat 4.

If you increase a note's duration you'll need empty space in the measure–Finale prevents you from overfilling a measure. If you are unable to lengthen a note or add new notes to a measure, try deleting some other notes first or change one to a shorter duration.

Editing with Simple Entry and your computer keyboard

Alternatively, use your computer keyboard to make changes. As was just pointed out, you can select any individual note in the score by holding down your OPTION key and clicking on the note. Once you’ve selected a note, there are many keyboard commands you can use to edit it.

To edit notes with Simple Entry using your computer keyboard

1. OPTION+click the F in the bottom staff, measure 2. The note is purple, indicating it is now active, and can be edited. Let's use our keyboard to make some common changes, starting with the duration.
   
   

If you make a mistake, you can always press COMMAND+Z to Undo.

2. OPTION + 1-8 changes the duration. Hold down OPTION and type 4 on your keypad to turn it into an eighth note. Then, press OPTION+5 to change it back to a quarter. At this point, you could choose from many editing keystrokes. For example, you could press T to add and remove a tie, or OPTION+G to convert the note to a grace note. All these keystrokes are listed under the Simple menu > Simple Edit Commands.
3. The arrow keys can be used to navigate. Press RIGHT ARROW to select the D. Press COMMAND+UP ARROW to move selection up a staff, then COMMAND+DOWN ARROW to move it back. Now, let's change some pitches.
4. With the D eighth note selected, type C. You've typed the letter name to change the pitch of a selected note. Notice the caret appears. Press RIGHT ARROW to select the next note and type B. Now, let's change them back.
5. Press LEFT ARROW twice (so the C is selected) and type D, RIGHT ARROW, C.

To learn all of Simple Entry’s powerful editing functions, open tutorial document EntryExercises.MUSX.

ヒント: Using your MIDI Keyboard to specify the pitch in Simple Entry: With the caret active, simply play the desired note or chord to add it to the score. Use the Simple Entry palette or your computer’s keypad to change to a new duration.

Adding triplets

In Finale, tuplets are any irregular grouping, including triplets, quintuplets, and so on. HyperScribe users may choose to play them into the score while recording, however you can also use Simple Entry to define your tuplet and enter it quickly.

When looking at the tools on your screen, you may notice two that look the same: the Tuplet tool on the Main Tool palette and the Simple Entry Tuplet tool. Although they look the same, these tools have very different functions. For this section, we’ll use the Tuplet tool found in the Simple Entry palette to enter a triplet.

To enter triplets with your mouse

1. Select the Eraser tool from the Simple Entry palette.
2. Erase the quarter notes on beats 3 and 4 in measure 4, bottom staff.
3. Select both the Eighth note tool and the Tuplet tool from the Simple Entry palette.
4. Click-in the triplet on beat three as shown below. With the first click, Finale creates the triplet bracket with two rests. For the second two notes, click to overwrite the rests.
   
   

Entering triplets with the computer keyboard

The fastest way to enter exactly the kind of tuplet you want is with the computer keyboard.

To enter triplets with Simple Entry using your computer keyboard

You can quickly define quintuplets, sextuplets or any other value with Simple Entry. Enter the first note of the tuplet, then press ALT+9 to bring up the Simple Entry Tuplet Definition box. Specify the kind of tuplet you wish to enter and press OK. Finale inserts the correct bracket and enters the appropriate number of rests so you can enter your notes.

1. Double click the Eighth Note tool to deselect the tuplet. (The last note of the triplet should still be selected)
2. Press ENTER to activate the Simple Entry caret.
3. Type the letter C to enter an eighth note.
4. Type the + (plus sign) to raise the pitch to a C#.
5. Type the number 9 (either one) and the triplet bracket and two eighth rests appear.
6. Now, simply type the pitch letters, using the + key for the accidental, to replace the rests with notes. Complete the triplet as shown. (For the last C sharp, Finale is smart enough to automatically inherit the accidental from the first note of the triplet, without showing it).
   
   

   For the last beat of a measure, it's particularly important to specify you are entering a tuplet prior to entering the notes (as shown in both cases here). If, for example, you try to enter the notes first and then change them to a triplet, you may notice there is not enough room in the measure.

Previous

Next